Skip to main content
Hygiene Maids of Frisco — professional house cleaning in Frisco, TX
Sign InSign InBook Cleaning

After the trades

Post-Construction Cleaning in Frisco, TX

Construction dust behaves differently to household dust. It is finer, it is abrasive, it carries drywall and silica, and it settles onto every horizontal surface in the building — then settles again the next day once the air stops moving. Clearing it takes repeated passes and a proper order of work, which is why one wipe-through never finishes the job.
Book CleaningCompare services
A newly finished open-plan kitchen and dining area, cleared of construction dust and ready for handover

The method

Why it takes more than one pass

Construction dust is fine enough to stay airborne long after the trades have gone. Any approach that ignores that ends up cleaning the same surfaces twice — and still leaving a film behind.
  1. Pass one

    Bulk and debris

    Protective film, tape residue, labels and stickers come off. Loose debris, offcuts and sawdust are cleared out of cabinetry, closets, corners and window channels. Heavy surface dust is removed from the top down.

    The building stops shedding material every time somebody walks through it.

  2. Settle

    The part people skip

    Fine dust disturbed by the first pass stays airborne for hours and then lands. Cleaning through that window means cleaning the same surfaces twice — so we let the building settle instead.

    What is still airborne comes down onto surfaces we have not finished yet.

  3. Pass two

    Final detail

    Vents and returns dusted so the HVAC stops redistributing. Glass, frames, tracks and sills finished. Cabinet and appliance interiors, bathrooms taken to finished condition, then repeated floor passes ending in a wet clean.

    Handover condition — a property somebody can walk into and move into.

On smaller renovations both passes can happen in one visit with a settle period between them. On a whole-house build or a full remodel, splitting them across two visits produces a noticeably better result.

What is included

The full post-construction scope

Debris and residue first, then fine dust, then the finish detail. Running it in any other order just moves the dust around.

Debris and residue clearance

  • Remaining protective film, tape residue and adhesive labels removed
  • Paint specks, caulk and joint-compound spots lifted from glass, tile and fixtures
  • Loose debris and sawdust cleared from cabinetry, closets and corners
  • Sticker and manufacturer labels off appliances, glazing and fittings

Fine-dust removal

  • High surfaces first: ledges, door frames, trim, fan blades and fixtures
  • Vent covers and return grilles dusted so the system stops redistributing dust
  • Walls and painted surfaces wiped where the finish allows
  • Repeated floor passes — vacuum, let it settle, vacuum again, then wet clean

Final detail

  • Interior glass, frames, tracks and sills
  • Inside cabinets, drawers, closets and pantry shelving
  • Appliance interiors and exteriors, sinks and fixtures polished
  • Bathrooms brought to finished condition — grout haze, glass, fittings, floors
A cleaner working carefully along the stone island of a newly finished kitchen
New surfaces are also delicate surfaces. Freshly installed stone, unsealed grout, powder-coated fittings and new glazing all need different handling from the same materials three years later — which is another reason this is not simply a deep clean with more dust.

How it runs

Scheduling it around the build

The single biggest factor in the result is when the clean happens relative to the last trade on site.
  1. 01

    Confirm the trades have finished

    Any work after the clean puts the dust straight back. We would rather schedule around the last trade on site than clean a house twice for you.

  2. 02

    Rough pass, then final pass

    The first pass takes out bulk debris and heavy surface dust. Air movement and settling then happen — and the final pass, ideally on a later visit, gets what has come down since.

  3. 03

    Handover condition

    The finish standard is a home somebody can walk into and move into. We will tell you honestly if the site is not ready for a final clean yet.

What we handle

  • Fine construction and drywall dust throughout
  • Adhesive residue, protective film, stickers and labels
  • Paint, caulk and joint-compound spots on hard surfaces
  • Loose debris and sawdust in cabinetry and closets
  • Full finish detail on kitchens, bathrooms, glass and floors

What belongs to the contractor

  • Hauling away construction waste and offcuts
  • Removing packaging, pallets and skip-scale material
  • Any remaining trade work — touch-up paint, snagging, repairs
  • Duct cleaning and HVAC servicing
  • Exterior site clearance and landscaping

Tell us what is still on site when you get in touch and we will be explicit about where the line falls.

Who it is for

Who books post-construction cleaning

Homeowners, builders and remodelers finishing work across Frisco and nearby.
  • Newly completed homes before handover or move-in
  • Kitchen, bathroom and whole-floor renovations
  • Additions and garage conversions that opened up an existing home
  • Builders and remodelers who need the property presentable for a client walk-through
Moving straight in afterwards?

Questions

Post-construction cleaning questions

All frequently asked questions

Is this the same as a deep clean?

No. A deep clean removes accumulated household soil. Post-construction cleaning removes fine building dust and installation residue, which needs different sequencing, repeated passes and careful handling of surfaces that are brand new and still delicate.

Why does the dust keep coming back?

Because construction dust is fine enough to stay airborne for a long time and the HVAC system moves it around. That is why a settle-and-repeat approach beats a single thorough pass, and why we prefer to split the work into two visits on larger jobs.

Do you remove building waste?

We clear the loose debris, dust and residue that comes with finishing. Hauling away construction waste, offcuts, packaging and skip-scale material is a contractor task, not a cleaning one — tell us what is left on site and we will be clear about the split.

Can you clean before the client walk-through?

Yes, and that is a common reason to book us. Give us the walk-through date and confirmation that the trades are done, and we will schedule the final pass to land as close to it as sensible.

Related services

After the build

What most people book next once the property is finished and the dust is gone.

Further reading

After the build

Why construction dust behaves the way it does, and what a new home needs before you move in.
All cleaning guides

Book a clean

Get the build handover-ready

Tell us the scale of the work, whether the trades have finished, and the date it needs to be presentable. We will schedule the final pass as close to that as sensible.

  • Insured & bonded
  • Background-checked cleaners
  • 24-hour guarantee
Book Cleaning(469) 405-3762

Serving Frisco and nearby communities · Monday – Saturday, 9:00 AM – 5:00 PM

The entryway of a newly finished home, cleared of construction dust and ready for handover